What are basement waterproofing systems and how do they work?
For answering that question it will help to first take a look at historically conventional basement waterproofing and the way it was supposed to work.
If you imagine how a basement is first built, when the house it is sited in was first conceived, then basically the following happens. A big hole in the ground is dug, the footer or foundations are laid, the walls of the basement are built and then the rest of the house follows.
The important point to note is the first one in the list above – that big hole in the ground.
The construction of basement walls invariably leaves a void on the exterior which requires backfilling. Loose backfill is used to fill in the gap. The problem here is that water looks for the path of least resistance, and you’ve just given it just that with a huge pile of loose backfill, no matter how well it’s been compacted.
This area is going to have water constantly seeping into it. The conventional way of waterproofing a basement provides some form of drainage pipe for this water to drain away, but the problem with this is that often these pipes get silted up. The water is naturally bringing all sorts of suspension with it. When these pipes get filled the system overloads and a lot of water pressure gets applied to the outside walls of the basement. Water will work its way through even the smallest gaps, even though basement walls are waterproofed in some way.
The problem of this type is not easily rectified. The reason is that the pipes which are supposed to take away the excess water are gradually getting deteriorated and worsen over time.
A huge problem is that often there isn’t access to these pipes. Basement waterproofing is also applied to the external walls of the basement to try and keep the water out. This is also called a tanked system.
A better basement waterproofing system, such as the drained cavity basement waterproofing system, works by getting rid of the water pressure on the walls. Water is controlled, collected and allowed to flow through hidden drainage channels either to natural drainage or to a sump pump where the water is removed away from the property.
Waterproofing a basement is a better system when they are installed internally and have easy access ports for removing the silt etc. It takes minimal disturbance to the original basement where traditional tanking or other methods have failed.
So to summarise, a good basement waterproofing system will:
- usually be a permanent or long-term solution
- stop both ways by which water can enter through the walls and up from the floor
- not disturb landscaping, decks, patios, driveways, etc
- usually be an approved waterproofing method for home loans
- often be substantially cheaper than other waterproofing methods
Choose a reputable basement waterproofer when protecting your home, remember it is economically foolish not to waterproof, because the increased value from waterproofing will definitely exceed the cost of the waterproofing.
In conclusion, you want a basement waterproofing system that will deliver:
- a permanent or long term fix
- stop water through the floor and walls
- not disturb the exterior appearance of your home
- an approved method by home loan lenders
- more affordable than other methods
Waterproofing your home is an investment in its value.
Related posts:
- Materials that are being used for basement waterproofing purpose and how those are used There can be some big differences in the materials and...
- Shield your Health With Waterproof bike Gear Imagine for a second , you’re flying along a road...
- Check Out These Suggestions To Make Your Home Beautiful You must be aware of your own limitations, and be...
- Water Leakage And Similar Problems Resolved Easily By Plumbers Sydney Introducing something new to the market which makes things simpler...
- How to Get yourself into the best Work Boots Purchasing the correct chippewa motorcycle boots for your particular work...